Lampblack machine already was one of indispensable home appliances in contemporary kitchen to decorate.Choose a good range hood to have the effect that gets twice the result with half the effort to the kitchen cleanness.But the appearance of lampblack machine and technology innovate ceaselessly, not be more powerful lampblack machine is the most suitable.How to choose the right range hood, let the character no small make up to tell you!

The range hood has experienced nearly 20 years in China, from the initial top suction type thin type range hood, developed to the side suction type deep type range hood, and evolved to the top suction type free cleaning and european-style range hood.Early thin range hoods are compact in structure and low in price, but have defects such as small suction, loud noise and easy oil leakage.

Classification of range hood

Top suction range hood

Advantage: big brand work more fine.Services are also more secure.Strong attraction.Smoking works well.Drawback: bulk is bigger, do not suit small-scale kitchen.

Side suction range hood

Prices range from 2000 to 5000.Advantage: beautiful, the style is novel and not easy to meet.Disadvantages: not strong suction (with the price of the same brand range hood, suction than the top suction type lower 1~2 cubic meters/minute).

Lower row range hood

Advantage: integral type one machine buy whole, save a space, lampblack does not pass the person's face, lampblack is sucked divide rate tall, the design accords with human body engineering.Cons: higher price point

The point of machine of lampblack of choose and buy

1. Identify the fuselage logo

Include content of two respects -- the mark of lampblack machine and use manual.The type, manufacturer or distributor name, trademark, rated voltage, rated input power and certification mark shall be marked on the lampblack suction machine.If lampblack machine has illume bulb, go up in lamp holder or lamp holder vicinity still should mark the maximum power that USES bulb.In addition, the control device and switch in the lampblack machine are marked by Numbers or words on its role.At the same time, each lampblack machine is accompanied by Chinese instructions to help consumers use safety.

2, see the structure of range hood

In the structural design of the range hood should be considered easy to effectively remove the accumulated oil and dirt, should try to achieve a smooth surface of the shell.Normally absorb lampblack machine to need to be secured to be used on the wall, divide so have key, aperture groove, hook to wait outside, still ask it to due and proper device fixes its on the wall, at the same time this kind of device should be made by the metal that is not easy to move or be out of shape.

3. Choose according to the actual situation

Of the size that consumer should according to him kitchen and lampblack how many will choose appropriate to absorb lampblack machine.The appearance of Europe type lampblack machine is beautiful, manufacturing craft is fine, but it does not have larger capacity collect smoke cover, suit at the modern kitchen with larger space, lampblack is not a lot of;Deep type lampblack machine modelling is beautiful, compare with the lampblack machine of other style, have the advantage with air quantity big commonly, and the structure that place of big capacity collect smoke hood has is advantageous to absorb platoon lampblack, suit the kitchen with more lampblack, larger space;Thin range hood light and beautiful appearance, occupies little space, suitable for small kitchen;And inferior deep model lampblack machine is between thin model and deep model lampblack machine, suit at the kitchen with space and lampblack moderate.

Choose and buy according to kitchen area and style.Kitchen, cigarette machine and cabinet appearance can be coordinated;U kitchen, cigarette machine with the overall appearance of kitchen cabinets, kitchenware, color to allocate;L model kitchen, much and extremely contracted, cigarette machine also can receive contracted style choose and buy.

4. Feel the effect on site

Consumer should choose to suck lampblack machine product according to his consumption ability, it is not the lampblack performance that the price is higher to suck lampblack machine product is better.When buying, you can feel the air leakage around the lampblack machine with the hand, the air volume is not large, if not and the air volume indicates that the lampblack machine's ability to absorb lampblack is strong;Can also directly feel the range hood noise level, especially the front noise, and touch the shell to see whether vibration, quiet, smooth operation of range hood is the user's first choice.

Range hood optional: optional error

Consumers are prone to purchase errors

1. The greater the power, the better?

Promoters tend to take the power to do an article, said the greater the power, the better the lampblack effect, this is a big misunderstanding.In fact, there is no necessary connection between power and smoke absorption effect. If a smoke absorption machine is only of high power, but the turbine is rough, the motor manufacturing is not up to standard, and the manufacturing quality of the inner cavity is also very poor, it is often just a dry power consumption, but can not achieve good results.

2. No one pays attention to the panel material?

In fact, the material of lampblack machine is very important, imagine, lampblack machine, want to contact the acid-base corrosion such as of all kinds of lampblack, condiment everyday, inside short-term likelihood cannot see, but the problem such as fade, oil leakage smoke can happen after half an year or a year.If the corrosion to the wire, it will cause a short circuit wire, burning motor accident.To test the material is also very simple, the best domestic materials are generally imported m-cr fine steel quality, looks fine texture.This material is resistant to oxidation, corrosion and will rub brighter.Want to discern the distinction of material of this kind of material and general alloy material, need to try with magnet only directly can, can be sucked, criterion affirmation is general inferior alloy or iron kind, what cannot be sucked just is fine rolled steel is qualitative.

3. Does the cavity design not matter?

The importance of the design of the inner cavity of the range hood can not be ignored, on the one hand to do as seamless as possible, easy to clean, but also to be able to protect the line, so that all kinds of lines in the lampblack this strong corrosion conditions can work normally, not be corrosion.And the seamless design inside lumen is not only lumen is seamless, and should accomplish the small face that is parallel with hearth also can be seamless, at the same time in oil net and place of union of lumen also should accomplish "invisible and seamless", want to install prevent oil wall to wait like this, just be to do not stay really clean dead Angle.

4. Free cleaning = free cleaning?

It is impossible to remove and wash the lampblack machine absolutely. After using a lampblack machine for one year, it must be removed and washed. Otherwise, the attachment of the turbine and the lampblack inside the cavity will seriously affect the lampblack effect.So a lampblack machine can not unlimited "free from cleaning", but should be designed as "can be cleaning", in a year later, you can remove the oil at home, turbine cleaning, that is really easy to clean.

Lampblack machine choose and buy: use maintain

Use and maintenance

1, highly

The installation height of lampblack machine must be appropriate, can assure not to meet already so, can assure the effect that takes lampblack again.

2, cleaning

In order to avoid the range hood noise or vibration is too large, oil dripping, oil leakage and other situations, we should regularly clean the range hood, so as to avoid motor, turbine and range hood inside the surface sticky oil too much.

3. Kitchen environment

Should maintain the airiness inside the kitchen when using lampblack machine, can prevent the air inside the kitchen to form negative pressure so, assure lampblack machine to take suck ability.

4. Do not disassemble and assemble without permission

Consumers had better not unassemble the lampblack machine for cleaning, because once the motor is not installed to ensure the effect of smoking, and will increase the noise;Had better let the professional personnel of manufacturer undertake cleaning.